Hwatime T10 CTG Machine – 10 Inch Fetal Monitor with Built-in Printer
The Hwatime T10 CTG machine is a 10-inch fetal monitor for gynae clinics, maternity homes and labour rooms. It records fetal heart rate, contractions and fetal movement, and prints the trace on a built-in thermal printer. A lithium battery covers power cuts.
Price on request
- Delivery across Pakistan
- Stock, condition and warranty confirmed in your quote
- WhatsApp or call 0333-4351637
Key benefits
- Tilts the 10-inch screen from 0 to 90 degrees: staff read it from a chair or standing.
- Records FHR, TOCO and fetal movement together on one trace.
- Prints on 150/152 mm thermal paper, so the trace goes straight into the file.
- Stores 60 hours of CTG and keeps data after a power failure.
- Runs about 3.5 hours on its lithium battery during load-shedding.
- Adds twins and triplets monitoring as an option when you order.
Description
A non-stress test needs a clean trace for 20 minutes or more. Power cuts and weak probes ruin it.
The T10 uses a 12-crystal wide-beam probe, so the heartbeat stays on trace when the baby moves. The battery carries the test through outages. It also calculates the Fischer score to help the doctor read the trace.
Use it in gynae OPDs, antenatal clinics, maternity homes and labour rooms.
- Not ideal for: home use without a trained doctor or midwife to read the trace.
Hwatime T10 CTG Machine specifications
| Spec | Value |
|---|---|
| Brand / model | Hwatime T10 |
| Type | CTG machine (fetal monitor) |
| Display | 10-inch colour screen, tilts 0–90° |
| Standard parameters | FHR, TOCO, FM |
| Fetal monitoring | Single fetus standard; twins and triplets optional |
| Fetal wake-up | Optional |
| FHR range | 50–210 bpm |
| FHR alarm limits | Upper 160/170/180/190 bpm, lower 90/100/110/120 bpm |
| FHR probe | 12-crystal wide-beam, waterproof, 1.0 MHz, under 5 mW/cm² |
| TOCO probe | Flat surface, waterproof, 0–100 range |
| Fetal movement | Manual event marker |
| Data | 60 hours CTG storage, 50 alarm event review, kept after power failure |
| Analysis | Automatic Fischer score |
| Printer | Built-in thermal, 150/152 mm paper (to be confirmed) |
| Battery | Built-in lithium, about 3.5 hours |
| Power | AC 110–240 V, 50/60 Hz |
| Maternal NIBP / SpO2 | To be confirmed |
| Warranty | To be confirmed |
Care tips
- Wipe probes with a soft damp cloth after each patient, then dry them.
- Use only CTG paper of the right width and keep it away from heat and sunlight.
- Coil probe cables loosely; sharp bends break the wires inside.
- Charge the battery fully and run on battery once a month to keep it healthy.
Frequently asked questions
How do I get the price?
Tap the Get a Quote on WhatsApp button or message 0333-4351637. Send the model, quantity and your city. We reply within 4 hours with a live quote, stock status and delivery time. We do not list prices on the site. Rates change often, so each Hwatime T10 CTG machine quote we send is current.
What does the Hwatime T10 CTG machine measure?
It measures fetal heart rate (FHR), uterine contractions (TOCO) and fetal movement (FM). It shows them as a trace on the 10-inch screen and prints them on thermal paper. Twins and triplets monitoring is an option you choose when you order.
Can the T10 monitor twins?
Yes, as an option. The standard unit monitors one fetus. Ask for the twins or triplets version when you order, and we will confirm the extra probes in the box. Twin traces show side by side so the doctor can compare both heart rates.
Does it work during load-shedding?
Yes. A built-in lithium battery runs it for about 3.5 hours. The T10 also keeps stored data after a power failure, so a test in progress is not lost. Keep it plugged in between patients so the battery stays full.
What paper does the Hwatime T10 printer use?
It uses 150 or 152 mm wide thermal CTG paper. Use paper made for fetal monitors so the grid matches the trace. Store spare rolls in a cool, dry place, because heat and sunlight fade thermal paper. Ask us for paper rolls with your order.




