IP-100 Plus Baby Incubator – Skin & Air Mode, 25–37 °C Control
The IP-100 Plus baby incubator keeps preterm and sick newborns in a steady, warm space. It controls air or skin temperature from 25 to 37 °C and holds it within 0.5 °C. It runs quietly at 55 dB or less.
Price on request
We usually reply within 4 hours. Ask about bulk and hospital orders. Delivery across Pakistan.
- Delivery across Pakistan
- Stock, condition and warranty confirmed in your quote
- WhatsApp or call 0333-4351637
Key benefits
- Switches between skin mode and air mode to suit each baby.
- Holds temperature steady, with change of 0.5 °C or less.
- Warms up in 30 minutes or less, so it is ready when a baby arrives.
- Runs at 55 dB or less, which keeps the baby calm.
- Alerts staff to temperature, humidity and power problems.
- Rolls on castors between the labour room and the nursery.
Description
Preterm babies cannot hold their own temperature. Small swings in heat cause stress and weight loss.
The IP-100 Plus controls heat by air or by a skin probe on the baby, with tight accuracy. Humidity reduces water loss through thin skin. Hand ports let staff care for the baby without opening the hood.
Use it in NICUs, maternity hospitals and paediatric wards.
- Not ideal for: ambulance transfers. Use a transport incubator that runs on vehicle power.
IP-100 Plus Baby Incubator specifications
| Spec | Value |
|---|---|
| Model | IP-100 Plus (to be confirmed) |
| Control | Skin mode and air mode |
| Air temperature range | 25–37 °C |
| Sensor accuracy | 0.3 °C or better |
| Temperature change | 0.5 °C or less |
| Warm-up time | 30 minutes or less |
| Noise | 55 dB(A) or less |
| Bassinet tilt | 0–5° |
| Humidity | Built-in humidity regulation (to be confirmed) |
| Alarms | Temperature, humidity, power |
| Access | Hand ports in the hood |
| Backup | Battery backup (to be confirmed) |
| Power | AC 220 V, 50 Hz, 600 VA |
| Mobility | Castors |
| Warranty | To be confirmed |
Care tips
- Fill the humidity tray with distilled water and change it every day.
- Clean the hood and mattress with a hospital-approved disinfectant between babies.
- Keep air vents and the inlet filter clear; replace the filter on the maker’s schedule.
- Test alarms and the temperature probe at the start of each shift.
Frequently asked questions
How do I get the price?
Tap the Get a Quote on WhatsApp button or message 0333-4351637. Send the model, quantity and your city. We reply within 4 hours with a live quote, stock status and delivery time. We do not list prices on the site. Rates change often, so each IP-100 Plus quote we send is current.
What temperature range does the IP-100 Plus baby incubator cover?
It controls air temperature from 25 to 37 °C. The sensor reads within 0.3 °C, and the temperature inside stays within 0.5 °C of the set value. It warms up in 30 minutes or less from switch-on, so it is ready before a planned delivery.
Does the IP-100 Plus have skin mode?
Yes. It has both skin mode and air mode. In skin mode, a probe on the baby's skin controls the heater to hold the baby's temperature. In air mode, it holds the air temperature inside the hood. Doctors choose the mode.
Does the IP-100 Plus work during load-shedding?
The supplier lists battery backup for power cuts. We will confirm the backup time with your quote. For long outages, connect the incubator to a hospital UPS or generator. The baby then stays warm until mains power returns. Test the backup each month.
Is the IP-100 Plus the same as the YP-100?
Supplier images and tags link the IP-100 Plus to the Ningbo David YP-100 range. We will confirm the exact maker and model plate with your quote. Then you know what you are buying and can source spares easily later. Ask for the manual too.
