Horizontal Autoclave Double Chamber – Full Premium SS for CSSD & OT
This horizontal autoclave double chamber model is full stainless steel with a steam jacket. Automatic temperature control holds the set point, and a safety valve and vacuum breaker protect each cycle. It suits CSSD units, OT complexes and busy hospitals.
Price on request
We usually reply within 4 hours. Ask about bulk and hospital orders. Delivery across Pakistan.
- Delivery across Pakistan
- Stock, condition and warranty confirmed in your quote
- WhatsApp or call 0333-4351637
Key benefits
- Keeps steam ready in a jacket: repeat cycles start sooner and packs dry better.
- Holds temperature automatically: staff do not need to adjust it through the cycle.
- Releases excess pressure: a safety valve vents steam if pressure goes too high.
- Protects the chamber as it cools: a vacuum breaker stops vacuum from forming.
- Resists rust: chamber and outer body are both stainless steel.
- Loads from the front at waist height.
Description
A CSSD runs load after load. Staff cannot watch every gauge, and a cooled chamber wastes time.
This model keeps a steam jacket hot and controls temperature automatically. Each load reaches 121 °C sooner and holds it without constant checking. The stainless steel body stays clean in a humid room.
Use it in CSSD units, OT complexes and large hospitals for instrument sets, drums, linen and glassware.
- Not ideal for: small clinics with a light daily load. Also not for rooms without space for a front-opening door.
Horizontal Autoclave Double Chamber Full Premium SS specifications
| Spec | Value |
|---|---|
| Product type | Horizontal steam autoclave, double chamber (steam jacket) |
| Body | Full stainless steel (to be confirmed) |
| Chamber size | To be confirmed |
| Temperature control | Automatic |
| Safety | Safety valve, vacuum breaker |
| Pressure gauge | Built-in |
| Standard cycle | 121 °C at about 15 psi |
| Heating | To be confirmed |
| Loading | Front loading |
| Origin | Made in Pakistan |
| Warranty | To be confirmed |
Care tips
- Use distilled or filtered water to stop scale on the heater.
- Leave gaps between packs so steam reaches every surface.
- Drain and wipe the chamber dry at the end of each day.
- Have a technician check the gauge and safety valve on a fixed schedule.
Frequently asked questions
How do I get the price?
Tap the Get a Quote on WhatsApp button or message 0333-4351637. Send the model, quantity and your city. We reply within 4 hours with a live quote, stock status and delivery time. We do not list prices on the site. Steel and currency rates change often, so each horizontal autoclave double chamber quote we send is current.
What is a horizontal autoclave double chamber?
It is a front-loading steam sterilizer with a steam jacket around the inner chamber. The jacket stays hot between loads, so repeat cycles start faster and wrapped packs dry better. That is why CSSD units and busy theatres choose it.
Is this autoclave suitable for a CSSD?
Yes. The steam jacket and automatic temperature control suit departments that sterilize all day. Staff set the cycle and the unit holds the temperature. The safety valve and vacuum breaker protect staff and the chamber during each run. It suits OT complexes as well.
What is the difference from the 16x30 double chamber model?
Both have a steam jacket. This model has a full stainless steel body and automatic temperature control. The 16x30 gas and electric model uses manual control, runs on dual fuel and suits a lower budget. Ask us for sizes of the full SS model.
Does it need professional installation?
Yes, we advise it. The unit needs a level floor, the right power point or gas line, and space to open the front door. A technician should also check the safety valve and gauge before the first cycle. Ask us about installation in your city.
