Horizontal Autoclave Single Chamber – Full Premium Stainless Steel
This horizontal autoclave single chamber model has stainless steel inside and out. It suits operation theatres, CSSD rooms, surgical centres and labs that want a rust-resistant, easy-to-clean steam sterilizer. The door stays locked while the chamber holds pressure, and a gauge shows it.
Price on request
We usually reply within 4 hours. Ask about bulk and hospital orders. Delivery across Pakistan.
- Delivery across Pakistan
- Stock, condition and warranty confirmed in your quote
- WhatsApp or call 0333-4351637
Key benefits
- Resists rust: the outer body is stainless steel too, not painted sheet.
- Locks under pressure: the door cannot open while steam is inside.
- Shows pressure on a built-in gauge: staff read the cycle at a glance.
- Loads from the front: drums slide in at waist height.
- Heats up fast: the unit reaches sterilizing pressure quickly, which saves fuel.
- Uses simple controls: new staff learn the cycle in one shift.
Description
Sterilization rooms are hot and humid. Painted outer bodies chip and rust, which looks poor in a clean area.
This model uses stainless steel for the chamber and the outer body. Steam at about 121 °C kills bacteria, viruses and spores on your instruments and packs. A built-in gauge and locking door keep each cycle safe.
Use it in OTs, labour rooms, surgical centres and labs for instruments, drums, linen and glassware.
- Not ideal for: buyers on the tightest budget (the standard 16×30 costs less), or for heat-sensitive plastics, oils and powders.
Horizontal Autoclave Single Chamber Full Premium SS specifications
| Spec | Value |
|---|---|
| Product type | Horizontal steam autoclave, single chamber |
| Body | Full stainless steel, chamber and outer body (to be confirmed) |
| Chamber size | To be confirmed |
| Door | Locks while under pressure |
| Pressure gauge | Built-in |
| Standard cycle | 121 °C at about 15 psi |
| Heating | To be confirmed |
| Loading | Front loading |
| Origin | Made in Pakistan |
| Warranty | To be confirmed |
Care tips
- Use distilled or filtered water to stop scale on the heater.
- Leave gaps between packs so steam reaches every surface.
- Drain and wipe the chamber dry at the end of each day.
- Have a technician check the gauge and safety valve on a fixed schedule.
Frequently asked questions
How do I get the price?
Tap the Get a Quote on WhatsApp button or message 0333-4351637. Send the model, quantity and your city. We reply within 4 hours with a live quote, stock status and delivery time. We do not list prices on the site. Steel and currency rates change often, so each horizontal autoclave single chamber quote we send is current.
What is a horizontal autoclave single chamber?
It is a front-loading steam sterilizer with one pressure chamber. Steam at about 121 °C kills germs on surgical instruments, linen and glassware. Horizontal models load at waist height and take bigger loads than vertical ones, so hospitals and OTs prefer them.
How is the full SS model different from the standard one?
The outer body is stainless steel, not painted sheet. It resists rust, wipes clean and keeps a hospital-grade look in humid sterilization rooms. The standard 16x30 model works the same way but has an 18-gauge outer sheet and costs less.
Can the door open while the chamber is under pressure?
No. The door locks while the chamber holds pressure. It opens only after you release the steam and the gauge falls to zero. This protects staff from steam burns. Always wait for zero before you turn the handle, and stand to one side as you open it.
Is a single chamber autoclave enough for a hospital?
Yes, for small and mid-sized hospitals with a moderate daily load. If your theatre or CSSD runs cycles back-to-back all day, choose a double chamber model. Its steam jacket stays hot, so cycles start sooner and packs dry better. We can help you pick the right one.
